The AX3 is an easy to use IP65 RGBW puck. It can be used as a decorative light, as well as a hanging or standing spotlight and for translucent objects, trusses, etc.,. It is extremely compact and still offers high brightness paired with long battery life and range.

The Astera system is a smart controller where infrared remote, wireless DMX and app work together to enable large setups that can be set up, monitored and adjusted quickly and conveniently.

Control lamps: Create complex programs from colors, effects and settings. The lamps will store them and repeat these effects without the need for a wireless connection. Create groups on the fly, assign positions and select which lamps should receive commands.

Monitor lamps: Keep a complete overview of the status and all settings of your lamps while you operate them. View battery status, radio signal, DMX address and which lamps you have targeted. Check your own lamps and be informed when a lamp is moved or switched off. This works if you control the lights with the app, but also if they are controlled via DMX.

Set up faster: Set up your lamps conveniently from a distance. Set DMX addresses and DMX tables for one or more lamps; 50 units can be prepared remotely in less than 5 minutes. After their event, they can perform a quick master reset for all or only partially selected settings.

LumenRadio: The AsteraBox can be used as a radio DMX transmitter; simply connect it to your DMX console with the included XLR adapter to transmit 1 DMX universe with most stable CRMX technology.

Compatibility: Astera lamps can be controlled by LumenRadio CRMX transmitters and also with other common protocols, so they can be used together with almost all other wireless lamps. However, W-DMX G5 and City Theatrical protocols are not supported. Simple commands such as on / off, colors, pre-programmed effects, etc. can be sent directly to the lamps with our infrared remote control. When programming lamps with the AsteraApp, the IR remote control can be used to confirm the settings for individual lights.

The new AX5 is designed for a fast return on investment. It replaces both battery spotlights, hard-wired spotlights and decorative floor spotlights. The next big step in the evolution of rechargeable spotlights.

The Astera system is a smart controller where infrared remote, wireless DMX and app work together to enable large setups that can be set up, monitored and adjusted quickly and conveniently.

Control lamps: Create complex programs from colors, effects and settings. The lamps will store them and repeat these effects without the need for a wireless connection. Create groups on the fly, assign positions and select which lamps should receive commands.

Monitor lamps: Keep a complete overview of the status and all settings of your lamps while you operate them. View battery status, radio signal, DMX address and which lamps you have targeted. Check your own lamps and be informed when a lamp is moved or switched off. This works if you control the lights with the app, but also if they are controlled via DMX.

Set up faster: Set up your lamps conveniently from a distance. Set DMX addresses and DMX tables for one or more lamps; 50 units can be prepared remotely in less than 5 minutes. After their event, they can perform a quick master reset for all or only partially selected settings.

LumenRadio: The AsteraBox can be used as a radio DMX transmitter; simply connect it to your DMX console with the included XLR adapter to transmit 1 DMX universe with most stable CRMX technology.

Compatibility: Astera lamps can be controlled by LumenRadio CRMX transmitters and also with other common protocols, so they can be used together with almost all other wireless lamps. However, W-DMX G5 and City Theatrical protocols are not supported. Simple commands such as on / off, colors, pre-programmed effects, etc. can be sent directly to the lamps with our infrared remote control. When programming lamps with the AsteraApp, the IR remote control can be used to confirm the settings for individual lights.

The TourLED Power 56 TW Zoom creates unimagined illumination possibilities. It houses 14 powerful LED chips with one warm white and one cool white module on board. Paired with the latest generation of zoom optics, it can be used very flexibly and defies even adverse weather conditions.

The wide 16 bit mixable color temperature spectrum in an outdoor housing with motorized zoom leaves nothing to be desired.em zoom leaves nothing to be desired.

The Ovation CYC 1 FC is an incredibly slim, discreet and lightweight CYC that delivers a wide, smooth field of light with considerable reach. The fully convection cooled unit is ideal for applications where silent operation is critical. Ovation Cyc 1 FC features the advanced RGBAL color mixing system found in our other Full Color Ovation units, which can reproduce virtually any color with tremendous realism and saturation.

Due to the low profile of the device, it can also be used effectively as a spotlight. The versatile fixture features an integrated kickstand and glare shield that can adjust and shape the throw, as well as an included Omega mount.

Ovation E-930VW is a powerful, variable white ellipsoid style luminaire that uses our unique 6-color LED system. This luminaire projects a bright, beautifully flat field of light at almost any white temperature with high CRI and CQS. Each color temperature can be further adjusted to +/- green to perfect the light field. For those times when a splash of colour is required, the device also gives you full control over any LED colour.

With a total of forty 15W RGBW LEDs, a massive luminous flux of 21,000 lm and IP65 rating, the Cameo ZENIT® W600 is a particularly powerful wash light for demanding outdoor applications. In addition to RDM and DMX control capabilities, it features an integrated 2.4 GHz W-DMX™ transceiver from Wireless Solution Sweden AB for convenient wireless control and wireless master-and-slave operation. With a variety of effective automated programs, it is also suitable as a standalone device.

For maximum flexibility, the ZENIT® W600 is equipped with Cameo’s innovative SnapMag® technology. It allows filter frames to be magnetically attached in seconds to easily change the beam angle, without tools or having to disassemble the fixture. SnapMag® frames with precision spreading lenses and a 4-way sash limiter are available as special accessories and are attached securely and firmly.

With advanced 16-bit technology that enables high resolution colour mixing and dimming, the ZENIT® W600 projects extremely intense and homogeneous colour surfaces with its 18° beam angle. Colour temperature correction and LED colour correction, four selectable dimmer curves and the adjustable simulation of the dimming behaviour of a halogen lamp make the floodlight the perfect tool for highly professional lighting.

Three temperature-controlled fans in the cast aluminium housing of the ZENIT® W600 ensure optimised operation. The user can choose from three predefined modes, from automated fan control to convection cooling for absolutely silent operation. A bright OLED display with four touch-sensitive control panels is used for easy and intuitive configuration, and an access lock protects against unauthorized changes to the headlamp’s menu settings.

The COLORado 2-Quad Zoom is a solid indoor/outdoor washlight with 14 RGBW LEDs. It convinces with its homogeneous RGBW colour mixing over the complete zoom range of 7°- 44°.

Both master dimmer and RGBW control have selectable dimming curves and are dimmable via 16bit.